Free Standing Broadband Acoustic Panels/Bass Trap
Acoustic treatment is a necessity for any recording environment! With properly placed treatment, you can drastically improve the response and accuracy of your monitoring system, and your room acoustics as well. A studio with the correct placement and quantity of treatments will greatly improve your recordings and mixes.
Free standing acoustic panels have a great advantage over acoustic foam that is stuck on the wall because they allow you to fine tune your room create a special zone for recording, mitigate large room acoustics, separate instruments, and so on.
These uniquely designed Broadband Sound Absorption Panels can do it all. They come with two adjustable tripod stands that allow you to adjust the height of the Acoustic panel (sometimes called Gobo) and position right where it counts the most.
The same panel can be taken off the Stands ad used as a Corner bass trap or a Sound absorbing
The panel casing is made out of Producer’s Choice sound absorption material and has heavy duty straps on the sides for height adjustment, or for using as a sound absorbing cloud. Loops on one side intended to hang the panel vertically or horizontally as a corner bass trap, or on a wall.
The height can be adjusted to improve the line of sight or target certain areas effectively.
Another unique feature of these panels is that they are ready to be filled with various sound blocking or sound absorbing materials such as rockwool, fiberglass, or whatever material you wish. For Broadband sound absorption or sound-blocking. (NOTE: the panels come WITHOUT rockwool filler).
To improve the sound blocking ability of the panel, you can insert a soundboard or layer of a limp mass barrier.
These panels are ideal for a variety of applications:
-Ideal for spaces where movable/temporary treatment is required
-Can be used to create separation between instruments
-Can be used as a corner bass trap
-Can be used as an acoustic cloud
– First reflection points treatment
– Must have for on stage live music band performers to prevent a backslap from brick walls, and on small stages in locations with bad acoustics. (any live stage performer knows what I am talking about!)
Set Includes: One Sound absorption casing and Two stands with adjustable height adapters,
Size: 48 inches high by 32 inches wide by 4 inches thick.
Weight: 14 lbs
Outer material: – Sound absorption Acoustic blanket Producer’s choice Casing
Tip: Note you may add a filler of your choice, or you may use it as is. Adding the Rockwool, fiberglass or glass wool material with higher lower frequency absorption will increase the broadband of the panels.
Adding a Limp mass barrier on one side – will make the panel more effective as separation panel between the instruments.
The casing takes two standard size Safe and Sound Rockwool slabs.
Note at this time we have to make these items individually per order, so it takes some time to make them.