Enhanced Mobile Sound Booth 6×3(2) with double layer of soundproofing
The NEW 2019 Enhanced SPB632 model blocks more sound than ever, with an additional layer of a limp-mass sound barrier and an improved DOUBLE layer of sound absorbing material to make your recordings sound crisp and clear. The booth is able to comfortably fit two people with their equipment, for practicing singing, musical instruments, voice over recordings, audiometry testing, and much more! The Enhanced Sound Isolation Booth, SPB632 measures approximately 80 inches tall x 40 inches wide x 80 inches long and can be transported in a passenger car with an assembly time of 30-60 minutes! The small and sleek design makes the Enhanced Sound Booth more portable and easily stored.
Double Soundproof panels and sound absorption panels can be rolled up and stored in the provided transport bags.
Lightweight aluminum frame is easy to assemble and disassemble without the need for any tools or screws etc. All poles are of the same size to make assembly easy. The frame can fit in the same bags with the panels.
Included LED lights (1 light per booth) provide sufficient illumination without extra noise or heat.
Booth has a door panel with zipper closure and a clear vinyl window. Internal sound absorbing panels do not have a window built-in to reduce the number of reflective surfaces.
This vocal booth is intuitive to set-up and easy to take down and transport. When the booth is disassembled and packed into two bags the weight can be distributed evenly with the weight per bag of approximately up to 130 lbs. The full bag measures approximately 42 inches long x 16 inches wide x 16 inches tall.
The bags are specially designed with additional secure straps inside and a strong zipper to keep sound panels together. Since the bags are designed to hold considerable weight, we also provided 4 handles, so two people can carry them.
The SPB632 is large enough to comfortably fit a chair or mic stand and practice guitars, wind instruments or a small drum set. Internal sound absorbing panels create a great acoustic environment for audio recording.
Outer Soundproof panels reduce the sound by a whopping 38 dB at mid frequency range with up to 84 dB at high frequency range..
Soundproofing walls are made out of specially constructed multilayered soundproof panels containing Limp Mass Membrane (STC 40). In assembled state outer sound proof walls are joined together with special corner panels with Velcro. The SPB632 can comfortably fit into an apartment with average ceiling height.
( NOTE: Limp Mass property of the wall panels increase soundproofing capacity compare to the material of the same weight but in a rigid form).
Sound absorption panels are made out of Producer’s Choice for superior booth acoustics (NRC 0.8, or 80% noise reduction).
- Assembled Size: 80” long x 40” wide x 80” high
- Sound Absorbing panels NRC -0.8
- Noise Isolation Class NIC = 29
- Soundproofing Walls = STC 40
- Weight – 1000 lbs.
- Frame: Aluminum. Connectors: steel.
- Outer fabric – Ballistic Nylon
- Color – Black
- 1 Led Light Strips
Assembly. The booth features a lightweight aluminum frame. The frame itself is easy to assemble, but with the addition of the swing door feature, the assembly of the door frame part got a little complicated. We recommend checking the hardware on the booths prior to assembly. Sometimes the nuts can be loose during transit and this may complicate the assembly. Please tighten up all the nuts and screws before putting the booth together.
WE STRONGLY RECOMMEND TO FOLLOW INSTRUCTIONS. (Not following assembly instructions will result in unnecessary waste of time and frustration.)