Mobile Soundproofing for Producers and Engineers

Producers and engineers need to have clean recordings to mix down properly to get a professional result. They need to be able to listen to those recordings accurately and be able to make changes that actually improve the sound. Back slap, early reflections and other issues within your space can cause producers and engineers to make audio mistakes and over emphasize certain frequencies, resulting in mixes that sound bad when played back on other systems. For example if the room is too bass heavy, you might end up with a mix that has too little bass when played back on another system.

So how do you deal with these issues simply and efficiently?

In order for this to happen, the room needs to have sound absorption treatment added to stop reflections from hard surfaces, removing the reverb, echo and overall room noise. Sound absorption materials like the Producer’s Choice audio blankets can be added to the room to help treat, or deaden sound for the best quality recordings. Sound absorption blankets are easy to install and are designed to help quiet a space and remove outside interference, resulting in a more accurate listening and recording environment. If you hang a few of these blankets in your space you will hear the immediate difference it makes. Place the acoustic blankets to cover hard reflective surfaces to help stop the bounce of sound in the room. Leave 3 or 4 inch air gap between the surface and blanket to create a dead air space that will stop even more noise, especially in the higher range (like a dog barking).

When recording multi-tracks with several performers, a free standing broadband sound absorber can be used to separate them in a room. An engineer can place a freestanding absorber right behind the player to block reflections coming from behind.
If a noisy door, window or AC unit is ruining your recordings, Gobos can be strategically placed to reduce the interference and help quiet a room for better sounding acoustics. Bass traps can be hung in the corner or off the ceiling as a sound cloud to reduce reflections from the ceiling.

ceiling sound baffle office acoustic treatment

If your ceilings are high, you might consider hanging some ceiling sound baffles made from the same sound absorption blanket material to break up reflective waves.

To block external noise, especially low frequency you would need a heavier sound proofing treatment like mass loaded vinyl. This material will help block low and loud sound waves and are thin and easy to install. The mass loaded vinyl is a dense material specifically designed to stop sound but it is not very strong and not designed to be used in construction under the drywall. Vocal Booth To Go designed a special reinforced limp mass barrier, that can be used on its own for sound proofing. For example you can nail it directly onto your wall or you can use it to sound proof your sound booth that you made.

For do it yourself vocal booth, or areas in your house that require special sound proofing treatment, we designed a multilayered composite sound proofing panels that have sound blocking barrier on one side and sound absorption felt on the other. If building a DIY vocal booth, the sound absorption layer should be facing inside the booth and the sound blocking on the out. On the other hand if you want to sound proof a wall, then the sound absorption felt should be facing the wall and sound blocking vinyl should be facing the room. This will considerably increase the sound transmission class of the wall.

“I’ve been using them for 10 months now. The sound is very controlled inside the room & I would say that the sound outside is considerably reduced. The blankets are double thickness over the outer wall and two internal walls & the window area is packed with foam & thick upholstery to cut more noise through that area. I play for about an hour a day & have had no complaints. The neighbors say they can hear me of course, but it’s not so bad.” Holmsteinn


Record studio-quality vocals at home or on the go with NEW 2019 VOMO.


The Carry-On Vocal Booth 1.0 is a portable sound booth that allows voice actors to make quality recording anywhere! This portable vocal booth folds into…

Browse Wishlist

Mobile Acoustic Vocal Booth ( AVB63) designed to create reverberation free acoustically treated environment for great audio recording.  It is  a good fit for two…


This portable hanging acoustic booth is ready when you are, wherever you are!! With it’s included carry bag, this booth can go with you and…


Roadworthy Rolling Bag for your Mobile Vocal Booth and all its parts! Double section design for metal frame and Absorption Panels. additional pockets for misc…


Mobile Acoustic Vocal Booth, (AVB44) is a portable walk-in audio recording studio that give your immediate acoustically treated room anywhere you set it up.  It…


Mobile Sound Proofer Vocal booth SPB33 with soundproofing and Door and sound absorption panels. Great for Voice over, Singing practice, Individual musical instruments practice, audiometry…


The NEW travel tripod that is designed to work with our world famous carry on vocal booth, VOMO.


The Voice Over Success Kit includes everything to be successful in your Voice Over career without spending a fortune. We created this kit so you…


Mobile Sound Booth 6x3 with soundproofing Provides up to 45 dB sound reduction and suitable for Voice over recording, singing practice, musical instruments practice, audiometry…


Enhanced Mobile Sound Booth 3x3 with double layer of soundproofing and sound absorption panels . Sound booth, provides up to 52 dB noise reduction. Great for…

Out of stock

The NEW travel tripod that is designed to work with our world famous carry on vocal booth, VOMO.